Click image for larger view

P/N: ETI0018-2006 Tactical Briefcase DC/AC Power Inverter 1000 VA, 600 Watts 24 VDC In, 120 VAC Out Technical Specifications Tactical Briefcase and Transit Case Inverters: Tactical Inverter Choices 150 Watt, 24 VDC Input 300 Watt, 24 VDC Input 600 Watt, 24 VDC Input 1000 Watt, 24 VDC Input 1500 Watt, 24 VDC Input 1800 Watt, 24 VDC Input 2000 Watt, 24 VDC Input 2500 Watt, 24 VDC Input 3500 Watt, 24 VDC Input 5000 Watt, 24 VDC Input 7000 Watt, 24 VDC Input 150 Watt, 12 VDC Input 300 Watt, 12 VDC Input 600 Watt, 12 VDC Input 1000 Watt, 12 VDC Input 1500 Watt, 12 VDC Input 1800 Watt, 12 VDC Input 2000 Watt, 12 VDC Input 2500 Watt, 12 VDC Input 3500 Watt, 12 VDC Input 5000 Watt, 12 VDC Input 7000 Watt, 12 VDC Input AC OUTPUT Output voltage: 120 VAC true sinewave Optional 220 VAC Output rating: 1000 VA, 600 watts continuous Output voltage regulation: ± 3.0% static regulation of nominal -10% to +4.0% dynamic Overload surge capacity: 1200 watts surge for 5 seconds Output protection: Overcurrent protection Harmonic distortion: Less than 3.0% THD Output frequency: 60 Hz ± 0.5% crystal controlled Optional 50 Hz Operational status LEDs and audible alarm DC INPUT Input voltage selection: Nominal 24 VDC Input voltage tolerance: 20-32 VDC Input control/protection: 2-pole Guarded DC Circuit Breaker, Under/Over voltage, Input Reverse Protection, Low Voltage Disconnect (LVD) protecting source so vehicle battery does not go below starting voltage Input power connection: Quick connect (1) NATO Slave female and Quick connect (1) Anderson Power Pole Input power cable: Uses standard NATO Slave male-male cable or Optional 10' Anderson to NATO Slave male connector DISTRIBUTION PANEL Output circuits: Four outputs standard Output protection: GFCI, Ground Fault Circuit Interrupter Output control: Optional panel switches or breakers Optional remote interlock ON/OFF control Output receptacles: NEMA 5-15R straight blade standard Ground connection: Quick connect jack MECHANICAL Enclosure type: Mil Grade Briefcase, water tight to -30 ft w/pressure relief valve, lockable Dimensions ( H x D x W ): 6.1 in (155 mm) x 12.2 in (310 mm) x 17.2 in (437 mm) Unit weight: 20 lb. (9.1 kg) with rugged, folding lift handle Audible noise: <47 dBA @ 5 ft., ANSI "A" scale Cooling type: Positive pressure fan. thermostatically controlled, over temperature protection Air intake filter: Easy clean intake air filter ENVIRONMENTAL Storage temperature: -40° to 160° F ambient (-40° to 71° C), lower/higher optional Operating temperature: -22° to 140° F ambient (-30° to 60° C ) lower/higher optional Operating humidity: 0 to 95% relative humidity, non-condensing, higher optional Storage elevation: Up to 40,000 ft (12,192 m) Operating elevation: Up to 10,000 ft (3,048 m), higher optional STANDARDS United States: Meets UL-1741 and 458 Canada: Meets CSA 107.1 safety requirements EMI Protection: EMI/RFI FCC Part 15, Class B standard OPTIONAL ACCESSORIES   Input Cables, Ground Cables w/ Clamp, Ground Rod Kit, Power Distribution Units

This page was last modified on: February 6, 2008

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Have an engineer contact me
Have a salesperson contact me
I prefer to be contacted by Email;   Telephone;  Fax;  Regular mail
My requirement is immediate;  1-3 months;  3-6 months;  Future

Name
Title
Company
Address
Email
Phone
Fax
To Better Help You, Please Describe Your Requirements